배송 위치를 선택하세요.

국가/지역 페이지 선택은 가격, 선적 옵션 및 제품 가용성과 같은 다양한 요인에 영향을 줄 수 있습니다.
담당자
한국이구스

인천광역시 연수구 벤처로

12번길 42

+82 32 821 2911
+82 32 821 2913
KR(KO)

igubal® 베어링 적용 사례

igubal® 베어링 요소는 열악한 환경에서도 문제 없이 사용할 수 있으며, 유지보수가 필요 없습니다. 또한 습한 환경에서도 부식에 강합니다. 작동 온도는 -30°C ~ +80°C로, 극도로 오염된 조건에서도 씰링이 필요하지 않습니다.

매년 igus® 엔지니어는 100개 이상의 새로운 플라스틱 혼합물을 개발하고 플레인 베어링에 대해 매년 3500개 이상의 테스트를 수행하여 수년에 걸쳐 폴리머의 마찰 특성에 대한 대규모 데이터베이스를 구축했습니다.

적용사례를 찾아보세요


다양한 산업 분야에서 igubal® 베어링 요소를 사용하면 어플리케이션이 기술적으로 개선되고 비용이 절감됩니다.


More applications

High sea catamaran

and the first one that is variably adjustable in its width.

Stone industry

igubal® pillow block bearing in the stone industry.

Swimming pool cover

Despite high installation costs, the solution with ball bearings and shrink tubing never achieved a proper sealing. The problem could be solved thanks to igubal® flange bearings.

Feeder magazine for furniture components

In this case, the use of igus® products is not only advantageous from a technical, but also from a financial point of view when compared to competitive products.

Test stand for control centres

Only extensive earthbound testing can demonstrate the suitability of components for space applications.

Delta robot

As part of a study project, igubal® variable double spherical bearings were used in a robot with parallel kinematics due to the individual pitch sizes in small quantities.

Plastic spherical bearings for electric wheelchairs

Lubrication- and maintenance-free plastic bearings provide the required functional reliability in electric wheelchairs.

4D seats

Maintenance-free igubal® pedestal bearings are used in theatre seats; they are noiseless and operate reliably even at high loads.

Car kit

igus® bearings are used for the gear shift linkage.

Lubrication-free linear and spherical bearings for baked goods gripper

This gripper picks up freshly baked goods from a conveyer belt and packs them in baskets.

Cross-trainer

When the design was revised, the metal pivoting bearings used so far were replaced by igubal® KGLM pivoting bearings.

Electric golf trolley

Four igubal® pivoting bearings from igus® were tested for the floating axle through the drive, and found to be suitable after several months of tests.

Ergonomic seat mechanism

The use of an igubal® EFSM flange bearing has allowed the development of a maintenance-free and silent seat mechanism element.

Flexible roofing

With this system, for example, terraces can be roofed flexibly. The roof is even waterproof in the closed state.

Plain and spherical plain bearings withstand strong vibrations in grain sorters

This machine cleans and sorts all types of grain. First the grain is separated from other material by an air current.

Jetpack

Since temperatures of several hundred degrees Celsius occur here, the pilot must wear fire and heat-resistant clothing. The bearings used also have to withstand the high temperatures and pressures.

Camera tripod

This adjustable camera tripod is usually used for cameras that have their centre of gravity well beyond the bearing axis.

Small electric plane

To achieve the best flying conditions, all components must be lightweight and at the same time as durable as possible.

Mars robot

This robotic vehicle is designed for a very special environment: it will one day be driving on Mars.

Pagepulltester

This pagepulltester is a high-precision measuring instrument for the bookbinding industry.

Artificial joint

This joint is a new development to be used in prostheses. iglidur® J plain bearings and igubal® spherical bearings are installed in it.

Solar aircraft

The prototype of the „Sunseeker Duo“ solar plane is the world‘s first solar-powered two-seater.

Gritting unit

The screwconveyer of the gritting unit has to be mounted movable in order to compensate axial offset and dynamic movements in the screw.

Adjustable arm chairs

the armrests of this chair are adjustable, to accommodate the needs of the individual user.

Wave machine

Since the tank is filled with salt water, the components used may not be susceptible to corrosion.

Paper banding machine

igubal® as alternative to metallic bearings in paper banding machines prevents the shaft from "seizing".

Circular knitting machine

igubal® spherical bearings of the dimensional series E by their maintenance-free feature and the omission of lubricants prevent any failure through the sticking together of textile fibers.

Mountainbike

The maintenance-free spherical bearings in the carbon yoke compensates for the frame and spring movements resulting from the dynamic quality of driving.

CD/DVD industry

Plastic rod end bearings provide for high plant availability.

Equipment manufacture

Lubrication-free tribopolymers in extreme application - Packaging unit for profiles.

Fertilizer spreader

A dynamic test reflects a service life of over 10 years.

Automatic door and gate drive

In outdoor use, the igubal® rod end bearings perform their task absolutely free of maintenance.

Displacement measurement sensor

No maintenance, no corrosion and the igubal® rod end bearings, painted in the housing color of the sensor, additionally form one unit with the cylinder

Current consumer

igubal® spherical bearings as insulating components in current consumers of the subway.

Conveyor system for the food industry

Abrasion, corrosion, high service life, resistance against cleaners were criteria for an application in the food sector.

레스큐 로봇

요나스군 테스는 그의 작은 로봇으로 2006 브레멘 로보컵에 참가하였습니다. 레스큐 로봇 부문에서 14세의 소년이 자신의 설계로 청소년 세계 챔피언 타이틀을 획득하였습니다.

Water regulation system

The used clevis joints and rod end bearings are corrosion-free and usable in liquid media.

Fully automatic tire fitting lines

No more expensive repairs

Screen facade for primary school

For wind and rain

“Portamobil” assembly aid for door leaves

Can be handled alone

Helicopter drone

Light and free from play

Chemist prescription printer

Precise and effective

Hand-operated water pump

Resistant to wind and rain

Small LED spotlight

Movable and attractive

Cleaning robot

Light and clean

Student project "PLC laboratory"

High positioning accuracy

Bipod for sports firearm

Maintenance-free and resilient

Inspection device

The bearings reliably transmit the high radial centering forces with low friction and free of stick-slip and minimize the arm system's friction through their integrated start-up.

Filling valve

The challenge: The operating temperature is maximum 140°C and the applied material must be resistant to all cleaning agents used in the beverages industry.

Climbing robot

The objective was to keep the weight of the climbing robot as low as possible, so that it can move with suction cups on smooth surfaces like window panes.

전기 구동 어린이 차량

Polymer bearings in electric cars for children: Top quality was achieved.

Rotor head

iglidur® G is the problem solver in this rotor head The rotor blades rotate about 400 times per minute and thereby execute oscillating motion with maximum 30°.

Banknote processing

Locking mechanism of a banknote processing machine: The double joint enables all necessary degrees of freedom and also absorbs the tensile strength.

3-axis tripod

Requirements for the design were stiffness, low-priced relocation and dirt resistance.

측정 장비

The igubal® ball heads are particularly well-suited for this requirement. They do not indicate any notable clearance even after about 15 million operation cycles.

Helicopter load system

A novel external load system for helicopters required a low weight, high reliability with simultaneous weather resistance and freedom from maintenance.

3D 플로우 디스트리뷰터

Ball bearing assemblies are very precarious due to the lubricant particularly under water. Stainless steel guidances cannot be considered due to the high costs. Plastic is used also for hygienic reasons.

배깅 머신

Application of polymer plain bearings in bagging machines for caustic soda.

Special bikes and therapeutic accessories

Plain, spherical and linear bearings made of plastic help to improve mobility and the quality of life

Smoke extraction system

Polymer rod end bearing in a smoke extraction system at a meat factory.

Snowboard-like appliance

Snowboard-like appliance

축구 테이블

Application of a high-value spindle lift table with steep-threaded spindle, linear guide systems and igubal® spherical bearings.

PLC laboratory trainer

The aim of the concept is to demonstrate to the students how to handle a programmable logic controller (abbreviation: PLC) in an attractive way.

지우게 로봇

뮌스터의 전문대학에 있는 한스 뵈클러 슐레의 지우개 로봇은 문화사에 기술을 접목시킵니다.

Bag forming, filling and sealing machine

Maintenance-free plastic bearing defy all outer influences and provides for the required service life.

Cordless screwdriver race

The unusual design for a recumbent bicycle has got what it takes: cordless screwdrivers are used here to drive it.

Photovoltaic tracking system

Wind, sand and sun: Plastic plain bearing for solar technology

Fitness equipment

New solutions for fitness equipment save production costs and assembly times.

Straightening technology

Quick, straight, precise: this is how the requirements in sheet metal machining can be summarized. Sophisticated straightening technology makes all this possible.

Delta robot

Model of a delta robot for the linear optimization of process routes.

Model ship

Built-in solid lubricants guarantee consistent functionality.

Bag forming, filling and sealing machine: Hygienic design of the format adjustment

On these horizontal forming, filling and sealing machines, the total freedom from maintenance over the machines' entire life cycle was particularly important for the customer.

Cow cleaner

Lubrication-free polymer bearing technology for cow cleaners


The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.