담당자
한국이구스

인천광역시 연수구 벤처로

12번길 42

+82 32 821 2911
+82 32 821 2913

drylin® 리드 스크류 너트, 미터식 나사산, J350FRM

  • 재료: iglidur® J350
  • 나사 방향: 오른 나사
  • 나사산 유형: 미터식 쓰레드
  • 설계: 표준형
  • 플랜지 포함 원형 리드 스크루 너트
어플리케이션
Lead screw nut made of iglidur® J350 - High-temperature material for temperatures up to +150°C
Our lead screw nut made of the high-performance polymer iglidur® J350 enables the application at permanently medium to high ambient temperatures. The long-term application temperature ideally should be between +60 and + 150°C in order to obtain the maximum performance out of the material.
Further advantages are:
 
► Dimensionally stable even at high temperatures
► Certifiable according to EN 45545 HL3, R24
► Ideally suited for the railway industry
► Good coefficient of friction at medium loads
► Application range up to +150°C upper long-term application temperature
► Permissible permanent surface pressure in the thread pitches 0 - 3.0MPa

All our lead screw nuts are made of the wear-resistant iglidur® high-performance polymers. This gives you the following advantages:
 
100% lubrication-free and maintenance-free
Durable and robust in adverse environments
Chemical resistant and mould-free
Quiet and vibration free travel
PTFE-free
FDA compliance
Stability of high loads
Long-term application in temperature ranges from -20°C to +150°C

The base material is additionally reinforced by technical fibres or fillers. The solid lubricants are microscopic particles, embedded in millions of tiny chambers of the material. This is adequate to sufficiently lubricate the immediate surrounding area and to reduce the friction of the system. These additives stabilise our lead screw nuts decisively for wear resistance.

There are 7 different standard materials available for various applications: iglidur J - high efficiency at all speeds, iglidur J350 - for temperatures up to +150°C, iglidur A180 - FDA-compliant for food and pharmaceutical industries, iglidur E7 - for high speeds with low loads, iglidur R - vibration and oscillation-inhibiting, iglidur J200 - best mating partner to aluminium and iglidur W300 - for high-load applications. 

In addition to a large selection of standard materials for lead screw technology, igus also offers a wide range of variants in the lead screw nut geometry itself:
원통형 리드 스크루 너트
스패너 (spanner) 플랫이 있는 원통형의 리드스크루 너트
플랜지형 리드 스크류 너트
플랜지 리드 스크류 너트, 스패너 플랫 포함
고하중 리드 스크류 너트
실린더형 주입 몰딩 리드 스크루 너트 (nut)
플랜지가 있는 사출 몰딩 리드 스크류 너트
기술 데이터
액세서리
다운로드

상담

배송 및 상담

개인별:

월~금 오전 7시 - 오후 8시.
토요일 오전 8시 - 오후 12시.

Online:

24h

The terms "igus", "Apiro", "CFRIP", "chainflex", "conprotect", "CTD", "drygear", "drylin", "dryspin", "dry-tech", "easy chain", "e-chain", "e-chain systems", "e-loop", "e-ketten", "e-kettensysteme", "e-spool", "e-skin", "flizz", "ibow", "igear", "iglidur", "igubal", "kineKIT", "manus", "motion plastics", "pikchain", "plastics for longer life", "print2mold", "readycable", "readychain", "ReBeL", "robolink", "speedigus", "tribofilament", "triflex", "xirodur" and "xiros" are legally protected trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany, and, where applicable, in some foreign countries. igus® GmbH points out that it does not sell any products of the companies Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosh Rexroth, SEW, Siemens, Stöber and all other drive manufacturers mentioned on this website. The products offered by igus® are those of igus® GmbH.