배송 위치를 선택하세요.

국가/지역 페이지 선택은 가격, 선적 옵션 및 제품 가용성과 같은 다양한 요인에 영향을 줄 수 있습니다.
담당자
한국이구스

인천광역시 연수구 벤처로

12번길 42

+82 32 821 2911
+82 32 821 2913
KR(KO)

Robot and motor control systems

The cost-effective and individually adaptable robot arms from igus® can be supplemented with different control concepts. A solution is available in the form of the industrial control system that is made by the company Commonplace Robotics GmbH and has been specially designed for robolink® D. It is supplied with an easy-to-use software. With the help of the software, the motion sequences of the robot are displayed and can be programmed and controlled in a manner that is easy to understand. The modular robolink® principle makes the robot arms usable with a self-programmed controller as well, thus offering maximum modularity. Due to the combination of robolink® gripper arm and control system, monotonous tasks, e.g. in quality assurance, assembly or commissioning, can be automated easily and the work sequences can also be coordinated effortlessly.
 

제품 수: 18

D1 assembly kit for 2-axis kinematics

Product information
  • Set of 2x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in 10m length
 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy 

The robot control system igus® Robot Control for delta and linear robots

Product information
  • Diverse automation tasks with simple programming software
  • For single axes, line, flat, linear and room linear robots and delta robots
  • Easy software installation for Windows 10
  • Use with a PC or tablet
  • Seven digital inputs/outputs, CRI interface, ModbusTCP/IP for connection to master control systems, e.g. Siemens or Beckhoff
  • 10m cable length

You can find all relevant documents in the downloads below.

TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software 

igus Robot Control Handheld

Product information
  • Handheld enables the robot to be commissioned and moved
  • Suitable for the igus Robot Control
  • Convenient operation for left and right-handers
  • User-friendly operation via touch display
문의하기로
1개 품목 배송 준비:
10-15일 내 배송 (영업일 기준)
제품 페이지로 이동

D1 assembly kit for 3-axis kinematics

Product information
  • Set of 3x igus® D1 dryve, proximity switches incl. bracket, connection cables with straight connector in 10m length
 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy 

The robot control system igus® Robot Control for Scara and articulated arm robots

Product information
  • Diverse automation tasks with simple programming software
  • For SCARA robots and articulated arm robots
  • Easy software installation for Windows 10
  • Use with a PC or tablet
  • Seven digital inputs/outputs, CRI interface, ModbusTCP/IP for connection to master control systems, e.g. Siemens or Beckhof
  • 10m cable length

You can find all relevant documents in the downloads below.

TEST BEFORE INVEST - Test the robot control system before you buy it with the igus® Robot Control software 

igus Robot Control I/O Modul

Product information
  • Extension to 7 additional digital inputs and outputs
  • Suitable for the igus Robot Control
  • Plug&Play solution
665,970 WON/Pc. -로부터
1개 품목 배송 준비:
10-15일 내 배송 (영업일 기준)
제품 페이지로 이동

drylin® 7축 | UR Cap + 제어함 통합

  • UR CAP으로 범용 로봇에 간단히 통합
  • 연결 준비가 된 플러그앤플레이 솔루션
  • 최고 속도: 300mm/s
5,594,460 WON/Pc. -로부터
1개 품목 배송 준비:
10-15일 내 배송 (영업일 기준)
제품 페이지로 이동

D1 control system set for 3-axis kinematics

Product information 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy 
문의하기로
1개 품목 배송 준비:
1-2일 내 배송 (영업일 기준)
제품 페이지로 이동

igus Robot Control motor modul

Product information
  • Extension of a motor module
  • Suitable for the igus Robot Control
  • Control of additional axes possible
  • Plug & Play solution
981,500 WON/Pc. -로부터
2개 품목 배송 준비:
10-15일 내 배송 (영업일 기준)
제품 페이지로 이동

D1 control system set for 2-axis kinematics

Product information 
  • A wide range of automation tasks by simple parameterisation, no programming necessary
  • For single axes, line, flat, linear and room linear robots and delta robots
  • No software installation or app required
  • Use with PC, tablet or smart phone
  • Stepper (ST), DC and EC/BLDC motors with up to 21A peak currents and 48V
  • Digital inputs/outputs, analogue inputs, CANopen, ModbusTCP (CANopen gateway) for connection to master control systems, e.g. Siemens or Beckhoff

    TEST BEFORE INVEST - Try out the motor control system with online simulation D1 dryve before you buy 
문의하기로
1개 품목 배송 준비:
1-2일 내 배송 (영업일 기준)
제품 페이지로 이동

7th axis | Switch cabinet integration - ReBeL version

Product information
  • Easy integration with lightweight robots
  • Plug & play solution ready for connection
  • Control cabinet
  • Cable set: 3 m
  • Max. speed: 0.3 m/s
 
Optionally available
New

Controller kit D7 for 3-axis-kinematics

Product information
  • Without connection cables
  • Set consists of 3x drylin D7
 
  • Can control stepper motors with up to 2.7 A continuous current at supply voltage of up to 48 V
  • Ready to use immediately
  • Easy control
  • Exact positioning
405,240 WON/Pc. -로부터
1개 품목 배송 준비:
10 - 15일 내 배송 (영업일 기준)
제품 페이지로 이동

7th axis | Switch cabinet integration - IO version

Product information
  • Easy integration with lightweight robots
  • Plug & play solution ready for connection
  • Control cabinet
  • Cable set: 3 m
  • Max. speed: 0.3 m/s
 
Optionally available
문의하기로
1개 품목 배송 준비:
10-15일 내 배송 (영업일 기준)
제품 페이지로 이동

드릴링 ® 7축 | EPSON Cap+스위치 캐비닛 통합

  • EPSON CAP를 이용한 EPSON 로봇의 단순한 통합
  • 연결 준비가 된 플러그앤플레이 솔루션
  • 최고 속도: 300mm/s
5,972,200 WON/Pc. -로부터
1개 품목 배송 준비:
10-15일 내 배송 (영업일 기준)
제품 페이지로 이동

Controller kit D8 for 3-axis-kinematics

Product information
  • Without connection cables
  • Set consists of 3x drylin D8
 
  • Can control stepper motors with up to 4A continuous current at supply voltage of up to 48V
  • Ready to use immediately
  • Easy control
  • Exact positioning
497,160 WON/Pc. -로부터
1개 품목 배송 준비:
1-2일 내 배송 (영업일 기준)
제품 페이지로 이동

"igus", "Apiro", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-kettensysteme", "e-skin", "e-spool", "flizz", "ibow", "igear", "iglidur", "igubal", "igutex", "kineKIT", "manus", "motion plastics", "pikchain", "readychain", "readycable", "ReBeL", "speedigus", "triflex", "robolink", "xirodur", 및 "xiros" 는 독일 및 일부 외국에서 igus® GmbH/Cologne의 법적으로 보호되는 상표입니다.

igus® GmbH는 Allen Bradley, B&R, Baumüller, Beckhoff, Lahr, Control Techniques, Danaher Motion, ELAU, FAGOR, FANUC, Festo, Heidenhain, Jetter, Lenze, LinMot, LTi DRiVES, Mitsubishi, NUM, Parker, Bosch Rexroth, SEW, Siemens, Stöber 및 이 웹사이트에서 언급된 다른 모든 드라이브 제조업체의 어떠한 제품도 판매하지 않음을 알려드립니다. 이구스에서 공급하는 제품은 igus® GmbH의 제품입니다.