Name: drygear® Apiro 조립 옵션 수직형, 플랜지 (RL-A54.0100)
Brand: igus
SKU: RL-A54.0100
Availability: InStock

drygear gearbox technology

Apiro 모듈형 기어박스 시스템

액세서리

drygear® apiro® installation option vertical flange

김성우

자동화 시스템을 재현하기만 하면 됩니다!

자동화 시스템 계산 및 구성

D1 모터 제어 시스템에 대한 비디오 튜토리얼

다음에 적합한 커플링 조인트 찾기
고객 애플리케이션: 요구사항을 입력하고 적합한 제안을 받으세요.
.

여기서 현재 구리 추가 비용을 계산하세요.

적합한 샤프트를 찾을 수 없나요? 그런 다음 원하는 방식으로 샤프트를 구성하기만 하면 됩니다!

케이블이 옵션으로 제공되는 바로 연결 가능한 하네스 에너지 체인을 원하시나요, 아니면 여기에서 선택한 에너지 체인이 애플리케이션에 적합한지 확실하지 않으신가요? 당사의 에너지 체인 전문가가 애플리케이션 데이터를 기반으로 적합한 에너지 체인을 선택하고 계산해 드립니다.

애플리케이션에 적합한 컨베이어 롤러를 빠르게 찾기: 요구 사항을 입력하기만 하면 예상 처짐 계산과 함께 적합한 컨베이어 롤러를 받아볼 수 있습니다.

요구 사항을 입력하기만 하면 적합한 볼 베어링을 사용 수명과 함께 받아볼 수 있습니다.

개별 케이블을 현재 가격으로 3분 만에 1,000m 길이부터 주문 가능합니다.

모터 제어 시스템의 애플리케이션, 프로토타입 제작 및 지원을 위한 비디오 지침

이동 거리, 곡률 반경 및 가속도 파라미터를 입력하면 chainflex® 케이블의 사용 수명을 알 수 있습니다.

제조업체 표준에 따라 하네스 드라이브 케이블을 빠르게 찾아 주문하세요.

몇 번의 클릭만으로 적합한 drylin® E 모터를 찾을 수 있습니다. 사용자의 요구사항을 입력하고 적합한 제안을 받으십시오.

950개 이상의 케이블과 3,500개의 플러그인 커넥터 중에서 맞춤형 솔루션을 선택하여 주문하세요.

<h3 style="text-align:start;">맞춤형 리드 스크류 가공이 필요합니까?</h3>
온라인으로 쉽게 제품 구성

With the help of the inner separation configurator you can create a layout of the needed cables in the e-chain and get a feeling if there is enough space for every cable and where is the best position inside the e-chain.&nbsp;

제품 선택 및 사용 수명 계산 애플리케이션 파라미터를 입력하면 iglidur® 플레인 베어링의 예상 사용 수명을 알 수 있습니다.

사용 수명 계산기를 사용하여 에너지 체인의 예상 사용 수명을 결정하세요.

애플리케이션에 가장 적합한 리드 스크류 드라이브 선택에 대한 도움말, 원하는 리드 스크류 드라이브 구성에 대한 수명 계산, 필요한 애플리케이션에 대한 모든 세부 정보가 포함된 PDF 다운로드.

CAD 소프트웨어, 2D 도면 및 3D 단계 파일, 온라인 생성, 즉시 가격 계산, 온라인에서 바로 주문 또는 견적 요청 없이 가공단을 맞춤 가공합니다.

igubal® 전문가가 세 단계로 질문합니다. 자가 보정 igubal® 베어링에 대한 요구 사항과 모든 이구스 제품에 대한 종합적인 적합성 및 사용 수명 분석을 제공하며,결과를 비교하여 가장 적합한 igubal® 베어링을 이구스 온라인 샵을 통해 직접 주문할 수 있습니다.

다양한 케이블 유형과 길이를 매력적인 조건으로 잔여 재고로 제공합니다.

적합한 사이즈를 찾을 수 없나요? 여기에서 간단히 구성하세요!

단 몇 번의 클릭으로 모터, 연결 케이블 및 장착 부품을 포함한 전체 직동 축을 구성할 수 있습니다.

놓친 것이 있나요? 그런 다음 원하는 솔루션을 직접 구성하기만 하면 됩니다. 온라인 툴을 사용하세요!

모터 제어 시스템을 위한 무료 샘플 프로그램으로 시간과 비용을 절약하세요.

적합한지 확실하지 않으신가요? 롤러 베어링 온라인 툴을 사용하여 온라인으로 간단히 구성하세요.

iglidur® 베어링 디자이너를 사용하면 개별 치수의 플레인 베어링과 선호하는 재질에 대한 할인 가격을 몇 단계 만에 표시할 수 있습니다. 마지막에 원하는 경우 개별 일반 베어링의 기술 도면을 받게 되며, 바로 주문하거나 추가 정보를 요청할 수 있습니다.

요구 사항을 입력하고 적합한 구성을 받아 애플리케이션에 맞는 완벽한 솔루션을 쉽게 찾을 수 있습니다.

올바른 플레인 베어링을 위한 iglidur® 제품 검색기

도면 부품 생산에 사용할 수 있는 다양한 제조 옵션이 있습니다. 기술적으로나 경제적으로 가장 효율적인 방법과 완벽한 플라스틱 재질에 대해 기꺼이 조언해 드리겠습니다.

어플리케이션 파라미터를 입력하고 몇 번 클릭하기만 하면 맞춤 선회 베어링과 예상 사용 수명을 확인할 수 있습니다.

The Quickrobot is the easiest and fasted way to get with only a few clicks a complete dresspack for several robot manufacturers and types.&nbsp;

제품 검색기는 고객의 애플리케이션에 적합한 모든 chainflex® 케이블에 대한 개요를 빠르게 제공합니다.

무료 브라우저 애플리케이션으로 모터 제어 시스템을 온라인으로 테스트하세요.

iglidur® H | High temperature and chemical resistance
iglidur® H is a fibre-reinforced thermoplastic material that was specially developed for applications in high humidity or under water. iglidur® H can be used completely free of lubrication; in wet applications, the surrounding media acts as additional lubricant. Suitable for temperatures up to +200°C. Very low coefficient of friction when used with hardened shafts.

Typical applications

Beverage industry
Medical technology
Offshore
Shipbuilding


When to use it?

﻿For underwater applications
When high temperature resistance is required
For high mechanical loading
For applications in contact with chemicals

When not to use it?

When extremely high wear resistance under water is required
When the best universal resistance to chemicals is required
For maximum compressive strength at higher temperatures



iglidur® J350 | Endurance runner with high dimensional stability at temperature - applicable with many shafts and load collectives
A superior material for rotational applications - and that on many different steel shafts: The service life of iglidur® J350  can often be multiplied at loads between 2MPa and 50MPa. In addition, the high temperature resistance makes it a very versatile material.

Typical applications

Vending machinery
Automotive
Glass industry
Machine tools


When to use it?

When a wear-resistant material for rotational movement at medium and high loads is required
When a cost-effective material is required for use at high temperatures
When press-fit up to +150°C is necessary
When high wear resistance is required at high loads
When the material is exposed to shock loading

When not to use it?

When continuous operating temperatures are higher than +180°C
When the lowest friction is required
When a cost-effective, low-friction mterial is sought
At high peripheral speeds




Food-safe according to FDA
Excellent abrasion resistance and very robust
Accurate surface details
Ideal for worm wheels


Selective laser sintering (SLS) material: iglidur i6
The iglidur i6 material was designed for laser sintering and was especially developed for manufacturing worm wheels for the food &amp; packaging industry. The tests in the igus test laboratory showed a longer service life than for conventionally milled gears - e.g. POM. This significantly increases flexibility in the design of components, because the laser sintering process eliminates the need for tooling and therefore special parts can be manufactured efficiently with no minimum order quantity. Furthermore, iglidur i6 is ideal for snap-on connections due to the higher elongation at break.

When do I use it?

When a food grade material is required
For applications with sliding motion, especially for worm gears
If a white base material is required for subsequent colouring

When not to use it?

When an optically detectable material in blue colour is required (→ iglidur i6-BLUE)
For applications under water or with high humidity (→ iglidur i8-ESD)
If components with ESD specifications are required (→ iglidur i8-ESD or iglidur i9-ESD)
In combination with anodised aluminium as a counter partner (→ iglidur i3)
For spur gear applications (→ iglidur i3)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)



iglidur H5 was developed especially for use in corrosive environments in which high edge pressures and impact loads also occur.


attributes_iglidur_i3000_3d_druck_material_description

iglidur M260 was specially developed for use in harsh environments. In addition, care was taken during development to be able to use the material particularly well for injection-molded thick-walled bearings. This makes iglidur M260 particularly suitable for applications in which thick-walled bushings are to be used or replaced that are also as robust as possible.



With DIN EN 45545, the new iglidur RW250 material fulfills the strict fire protection requirements of railroad technology. In addition, the material formulation has been optimized for absolute wear resistance and offers very good running properties in many applications.  


iglidur® M250 | The robust all-rounder with outstanding vibration damping
The self-lubricating material iglidur® M250 is particularly characterized by impact strength, vibration damping and wear resistance. It proves itself particularly well under stresses where a vibration-damping function of the material is required, e.g. in sports equipment and packaging machines. As it is also capable of embedding dirt, it is also suitable for agricultural machinery and gardening equipment.

Typical areas of application

agricultural engineering
Mechanical engineering
Furniture / industrial design
Textile industry


When do I use it?

When the material is exposed to heavy soiling
For excellent vibration damping
At low to medium speeds
When mechanical reworking is required
Insensitive to edge pressure
High impact strength
Thick wall thicknesses according to DIN 1850

When should I not use it?

For applications in wet areas
When very high precision is required
For very smooth shafts
When a cost-effective material with maximum wear resistance is required




Electrostatically dissipative (ESD), without interference currents in live parts
Contact resistance 10^6 – 10^9 Ohm x cm
Increased rigidity
Colour: black (continuous)


Selective laser sintering (SLS) material: iglidur i9-ESD
The laser sintering powder iglidur i9-ESD has a electrical resistance of 10^6 to 10^9 Ohm. This makes it electrostatically dissipative (ESD), and at the same time reduces the risk of unwanted discharge currents between sensitive, electrical components. This makes it ideal for applications in the electronics and semiconductor industries, and especially for electronic connectors.

When to use it?

When antistatic components with medium conductivity are needed
For applications under water or with high humidity
When components with high stiffness are required
When components with high UV resistance are required
When black components are required

When not to use it?

If I need ESD parts with better conductivity (→ iglidur i8-ESD)
For worm wheel applications (→ iglidur i6)
If the application requires a food grade material (→ iglidur i6 or iglidur i6-BLUE)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)



iglidur® PEP - for all shaft surfaces and materials 
iglidur® PEP consists of a combination of two plastic layers. Even threads, rust or scratches do not impair the permanently reliable function. 



Versatile use: good combination of high wear resistance, strength and temperature resistance


Self-lubricating filament iglidur i180 
Components made from the 3D printing material iglidur i180 can be used universally for all types of wear parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds.

When to use it?

When an increased permanent application temperature of up to 100°C is required
For highly dynamic plain bearing applications


When not to use it?

If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260)




Flame-retardant, according to UL94-V0 and DIN EN 45545
Temperature-resistant up to + 170 °C
Flexural strength 91 MPa


Fire-retardant high-temperature filament, ideal for the railway industry
iglidur RW370 is an abrasion-resistant, high-temperature tribofilament which was specifically developed for use in railway vehicles. As such, its fire-retardant specifications conform to UL94-V0 and EN45545. In addition, it has the maximum mechanical strength of all tribofilaments and a long-term temperature resistance of 170 °C, which makes it the material of choice for high-temperature applications.

When to use it?

When the application requires high temperature resistance
When the mechanical strength of the other tribofilaments is not sufficient
When fire-retardant specifications are required

When not to use it?

When very high wear resistance at high-temperature load is required (→ iglidur A350)



attributes_iglidur_k230_material_description

attributes_igutex_tx3_material_description


Versatile use: good combination of high wear resistance, strength and temperature resistance
Colour: black

Self-lubricating filament iglidur i180  in black colour
Components made from the 3D printing material iglidur i180-BL can be used universally for all types of wear-resistant parts, such as plain bearings, gears and drive nuts, as this material has also been specifically developed for moving applications. The higher wear resistance and higher temperature resistance (100°C over the long term) extend the range of application, especially for more dynamic applications with higher surface speeds.

When to use it?

When an increased permanent application temperature of up to 100°C is required
For highly dynamic plain bearing applications
If a black material is required

When not to use it?

If the application temperature is higher than 100°C in the long-term, or even higher wear resistance is required (→ iglidur J260) 



Bearings of so-called tracking systems in photovoltaic systems defy particularly adverse environmental conditions. iglidur P UV was developed for this area of application. The special composition ensures high resistance to ultraviolet rays and ensures that components made of iglidur P UV function for a particularly long time and with the least possible loss of strength. 


iglidur® A160 | FDA and EU regulation-compliant for chemicals and food
iglidur® A160 is characterised by extreme media resistance at low costs. Tribologically optimised, the material can be used up to +90°C and also meets the conformity requirements of the food processing sector. The property profile is rounded off by the &#34;optical detectability&#34; often desired in the industry, i.e. the blue colour.

Typical application areas

Beverage industry
Food industry
Medical technology


When to use it?

When a material with maximum media resistance is required
When a cost-effective material with high media resistance is required
When a material conforming to the 10/2011 EC is required

When not to use it?

When a universal material is needed for the food industry
If a very media-resistant material is sought for applications at more than +90°C
When a low-cost material with high wear resistance in dry operation is required




Food compliant according to FDA
Blue colour for optical detectability
Excellent abrasion resistance and toughness
Accurate surface details
Ideal for worm wheels


Selective laser sintering (SLS) material: iglidur i6-BLUE
The iglidur i6-BLUE material, developed for laser sintering, is specifically intended for use as a worm wheel, and for food contact. The tests in the igus test laboratory showed a longer service life than for conventionally milled gears - e.g. POM - This significantly increases flexibility in the design of components, because the laser sintering process eliminates the need for tooling and therefore special parts can be manufactured efficiently with no minimum order quantity. Furthermore, iglidur i6-BLUE is ideal for snap-on connections due to the higher elongation at break.

When do I use it?

When a food-compliant material in a continuous blue colour is required (optical detectability)
For applications with sliding motion, especially for worm gears

When not to use it?

For applications under water or with high humidity (→ iglidur i8-ESD)
If components with ESD specifications are required (→ iglidur i8-ESD or iglidur i9-ESD)
In combination with anodised aluminium as a counter partner (→ iglidur i3)
For spur gear applications (→ iglidur i3)
If the application temperature is higher than 80 °C in the long term (→ iglidur A350 or iglidur RW370)




Extremely robust and rigid with carbon fibre reinforcement
Suitable for structural components and multi-material components
Flexural strength up to 237 MPa, flexural modulus of elasticity of up to 11.5 GPa, improved strength in z-direction


High-strength filament for structural components or as a material partner for multi-material components
igumid P190 is an extremely strong and stiff 3D printed filament due to the reinforcement with carbon fibre. It was specially developed as a partner material for iglidur i190 for the production of very strong and at the same time friction-optimised components in multi-material printing. Furthermore, it can be used for printing stable structural components. Thanks to the high strength and high rigidity, as well as its low density of 1.25g/cm³, igumid P190 is ideal for lightweight construction with low material requirements.

When to use it?

For structural components where high strength and stiffness are required
For special mounting brackets for energy chains
As a multi-material partner with iglidur i190, for the combination of a high-strength material (igumid P190) and a particularly durable plastic (iglidur i190)

When not to use it?
For friction and wear applications (→ iglidur i150 or iglidur i180 or iglidur i190)
If the application requires a food-grade material (→ iglidur i150 or iglidur i151 or iglidur A350)
If the application temperature is higher than 120 °C in the long term (→ iglidur A350 or iglidur RW370)



Die Werkstoffe der ECON-Serie, iglidur J4, GLW, P4, PLW210, ALW350, HLW und NEU: Q2LW sind nicht nur für viele Anwendungsbereiche bestens geeignet, sondern nun auch im europäischen Markt in Standardabmessungen verfügbar.  
Vorteile: 

Universell einsetzbar
Varianten für hohe Temperaturen
Lebensmitteleinsatz und Verschleißfestigkeit verfügbar
Kostengünstig, besonders bei größeren Stückzahlen
Ca. 50 % reduzierter CO2-Fußabdruck  



attributes_iglidur_q2e_material_description


Higher application temperature up to 110 °C
Highest flexural strength of 94 MPa at 20 °C
PFAS-free
Electrostatic dissipative (ESD)


Selective laser sintering (SLS) material: iglidur i230
The iglidur i230 laser sintering powder stands out as another all-rounder material among the iglidur SLS materials. Unlike iglidur i3, however, it is designed for higher application temperatures and withstands long-term temperatures of up to 110 °C. Moreover, the material is 80 % more wear-resistant than PA12. Of all iglidur SLS materials, iglidur i230 offers the highest flexural strength and, in addtion, it has electrostatically dissipative (ESD) properties.
Good to know: iglidur i230 contains no PTFE and is therefore not affected by future PFAS regulations.

When to use it?

When a PFAS-free material is required
If the application temperature is above 80 °C in the long term and at a maximum of 110 °C
If components with high mechanical strength (also structural components) are required
If components with ESD properties are required up to 110 °C application temperature

When not to use it?

If components with higher wear resistance at max. 80 °C application temperature are required (→ iglidur i3)
If components with ESD properties up to 80 °C application temperature are required (→ iglidur i8-ESD or iglidur i9-ESD)
For worm wheel applications (→ iglidur i6)
If the application requires a food-safe material (→ iglidur i6)
When components with higher elasticity are required (→ iglidur i10)
If the application temperature is higher than 110 °C in the long term (→ iglidur A350 or iglidur RW370)




Flexural strength up to 80 MPa, best iglidur filament
Excellent service life - 50 times higher abrasion resistance than ABS


Flexible and wear-resistant filament - iglidur i190
iglidur i190 is characterised by high wear resistance, as the material is enriched with solid lubricants. It can be processed on regular 3D printers, but a closed 3D printer is recommended. Due to its high wear resistance and excellent mechanical specifications (strength, toughness, coating adhesion), it is an all-round material that is suitable for most applications and 3D printers. Of all igus tribofilaments, only iglidur RW370 has a higher strength than iglidur i190. It can also withstand a long-term application temperature of up to 90 °C (after tempering the component).

When to use it?

For all types of applications where low friction and high wear resistance are important
When higher strengths are required

When not to use it?

If the application temperature is higher than 90 °C in the long term (→ iglidur J260 or iglidur RW370)
For applications under water or with high humidity (→ iglidur i180)
If the application requires a food grade material (→ iglidur i150 or iglidur A350)



The material offers excellent friction and wear values at low to medium loads.
Areas of application: 

Packaging machines
Textile machinery
Furniture design 



attributes_igumid_p150_3d_druck_material_description

iglidur® H2 | Low cost, for high temperaturesWhen using iglidur® H2, economic aspects are in the focus. It is the first time that it is possible to offer such a high-performance material for high volume applications with these technical advantages at such a cost-effective price: temperatures up to +200°C, permitted surface pressure up to 110N/mm², and excellent chemical resistance. The iglidur® H2 material is self-lubricating and suitable for all motions.Typical applications

Automotive 


When to use it?

For use under water
When a cost-effective material is required for use at high temperatures
For applications with fuels, oils, etc.
Resistant to chemicals


When not to use it?

When extreme wear resistance is required
When vibration dampening is required
When neither increased temperatures nor media contact occur 



attributes_iglidur_uw160_material_description


Food compliant according to FDA and EU Regulation 10/2011
Blue colour for optical detectability 


Easy-to-process, abrasion-resistant filament for the printing of food grade components in blueThe iglidur i151 tribofilament is suitable for components with high wear resistance, as the material is filled with solid lubricants. It was specifically developed for use in the food and packaging industry: the printed components are compliant to FDA and EU Regulation 10/2011 and the blue colour ensures the required optical detectability. iglidur i151 is also an all-rounder material, and due to its good mechanical properties (strength, toughness, layer adhesion) it is suitable for most applications. iglidur i151 has comparable mechanical specifications as iglidur i150, by far the most frequently used igus filament. There are restrictions in terms of the maximum permanent application temperature of 65°C and for highly dynamic applications.

When to use it?

If the application requires a food grade material according to FDA or EU 10/2011
When an optically detectable material is required
For applications with low or medium surface speeds (safe up to 0.2 m/s, test for higher speeds)


When not to use it?

When the application temperature is higher than 65°C for a long time (→ iglidur i180 or iglidur J260 or iglidur A350 for food contact)
For highly dynamic applications (→ iglidur i180)
If food conformity, according to FDA ,and the blue colour are not necessary (→ iglidur i150)



attributes_igutex_tx1_material_description

attributes_iglidur_i8_3d_druck_material_description

drygear® apiro® installation option vertical flange

제품설명

기술 데이터

다운로드

상담

문의사항에 개별적으로 답변해 드리겠습니다.

배송 및 상담

drygear® apiro® installation option vertical flange

제품­설명

기술 데이터

다운로드

상담

문의사항에 개별적으로 답변해 드리겠습니다.

배송 및 상담

제품설명